Skip to content

Bonded and insured, 12 years in business. Free quote

(626) 587-3172
(626) 587-3172
Installer on an extension ladder caulking around a white vinyl slider window set inside the old wood frame of a beige stucco house on an overcast day

ServicesWindow Retrofitting

Window Retrofitting in Rowland Heights

We replace old aluminum and single-pane windows by fitting new, custom-sized units into the existing frames. Your stucco, drywall and interior paint stay as they are. One person handles your job from the first measurement to the final cleanup.

A cleaner way to replace windows in a stucco home

Retrofitting, also called insert installation, is the most common way to replace windows in stucco homes. We remove the old sashes and glass, leave the original frame in the wall, and set a new window over it with a flush fin that covers the old metal edge. The stucco outside and the drywall inside are left alone.

It is the right call when the existing frame is sound and square, which describes most aluminum frames installed from the 1960s through the 1990s. If a frame is badly bent, a wood sill has rotted, or you want to change the size of an opening, a full-frame job makes more sense, and we cover that under Window Installation. We tell you which method your home needs after we look, not before.

From your first call, the same person answers your questions, measures, orders, schedules the crew and checks the finished work. You are not passed between a salesperson, an office and an installer who has never heard your name.

What a retrofit includes

Measurements for every opening
Frames that have been in the wall for decades are seldom true, so we take readings at the top, middle and bottom of each opening, side to side and up and down. Each new window is built to those figures, not chosen from a stock size.
Removal and haul-away
Old panes, tracks and hardware come out carefully. The glass and scrap aluminum leave with us.
Flush-fin frames over the old metal
The new frame's exterior fin sits flat against the stucco and hides the original frame edge. From the street, you see one clean, finished line around each window.
Sealing against air and water
We shim and level each unit, fill the gap with low-expansion foam, and run a continuous bead of exterior sealant where the fin meets the stucco. That seal is what keeps drafts and wind-driven rain out, so we take our time with it.
A finished interior edge
Inside, we trim and caulk the joint between the new frame and the old opening so it reads as part of the wall.
Crystal Pacific windows
We are an authorized Crystal Pacific Windows installer and can fit their vinyl windows with dual-pane, low-E glass in sliders, picture windows and other common styles.

Signs your windows are ready for a retrofit

  • Sliders that drag or jump the track

    Worn rollers and pitted aluminum tracks make windows hard to open and easy to knock loose. Once they fight you every time, a new unit is usually the better use of money.

  • Heat that lingers near the glass

    West- and south-facing rooms that stay warm into the evening are often losing the battle through single-pane glass and thin metal frames.

  • Fog or condensation

    Moisture on single-pane glass in winter, or haze trapped between panes of an older dual-pane unit, means the window is no longer insulating well.

  • Latches that no longer hold

    If a window will not lock firmly, it is a security gap as much as an energy one.

  • Street and yard noise

    Thin glass lets in traffic and neighbor noise. Dual-pane units noticeably quiet a bedroom or living room.

How a retrofit job runs

  1. 1

    Free in-home estimate

    We walk through each window with you, check the frames for square and damage, and talk through styles and glass. Free in-home estimates with no sales pressure or obligation. You get a written estimate that lists every window.

  2. 2

    Final measure and order

    Once you decide, we take final measurements and order windows built to your openings. Your contact lets you know when they arrive and books your install day.

  3. 3

    Install day

    The crew lays drop cloths near each window and moves furniture back as needed. Each old window comes out only when its replacement is ready to go in, so a room stays open to the outside for a short stretch rather than all day. You hear the expected schedule at the estimate.

  4. 4

    Final check and tidy-up

    With the crew still on site, you try each new window yourself, sliding it, latching it and checking the seal, while we answer anything that comes up. Then old glass, scrap and packaging are cleared out and the floors near each opening are swept. Later questions still go to the person you have dealt with from day one.

Worker in a cap and tool belt holds a fan of frame color samples for a homeowner outside a stucco home's front door with decorative glass sidelights

What affects the cost of retrofitting

Retrofit pricing follows what your windows actually need, not a package price. We count each window, note its size and style, and put a written figure in your hands before anything is ordered. If you are weighing our numbers against another estimate, bring it up on the call and we will go through it with you.

How many windows, and how big
Each added window and each larger opening adds material and installation time. Doing several rooms in one order tends to be more efficient than spreading them across separate visits.
Style and operation
A fixed picture window costs less to build than one that slides, tilts or cranks open.
Glass package
Low-E coatings and gas fills change the price. Code also requires tempered safety glass in certain spots, such as near doors and over tubs.
Frame condition
Frames that are out of square or partly damaged can need extra shimming or trim work to finish cleanly.
Access
Second-story windows, tight side yards and openings behind heavy landscaping take more setup time.

Window retrofitting questions

Something not covered here? (626) 587-3172

Will retrofitting damage my stucco?

No. The old frame stays in the wall and the new window's fin sits over it, so we do not cut or patch stucco. The only exterior change is a clean sealant line where the fin meets the wall.

Do I lose any glass area?

A little, because the new frame sits inside the old one. On most windows the difference is small, and we show you what to expect at the estimate so nothing catches you off guard.

Is a retrofit as energy efficient as a full-frame install?

The window itself performs the same either way. What matters is a good seal around the frame, which is why we foam and caulk every opening. Our Energy Efficient Windows page covers glass options in more detail.

Can you retrofit just a few windows?

Yes. Many people start with the rooms that bother them most, such as a hot bedroom or a noisy front room, and do the rest later. We match styles and colors so the house still looks consistent.

What happens if a problem comes up while the crew is at my house?

We are a bonded and insured company with 12 years in business, and install days follow a routine we have refined over that time. If something needs attention, you call the same contact you have worked with from the start, and they settle it with the crew directly.

Single-story stucco house with new white-framed windows on both sides of a black entry door with glass sidelites, shrubs, walkway, and a tool bag and bucket nearby

Talk to the person who will see your job through

Reach us for a free quote and we will set a time to look at your windows, in Rowland Heights or nearby towns like Hacienda Heights and Diamond Bar. The person you speak with stays on your job until the last frame is sealed.