Skip to content

Bonded and insured, 12 years in business. Free quote

(626) 587-3172
(626) 587-3172
Installer presses black flashing tape around a new white vinyl window set in a house-wrapped stucco wall, with a ladder, buckets and a tape roll nearby

ServicesWindow Installation

Window Installation in Rowland Heights

When a wall gets a new opening, an addition goes up or a remodel moves a window, we frame, flash and set the unit so it stays sealed and square for years. One person handles your questions and schedule from the first visit to the final cleanup.

Installation for openings that are new or changing

Window installation is different work from swapping an old unit into the same hole. We cut or reframe the opening, add a proper header where the wall needs one, build the sill and wrap the rough opening before any glass arrives. It is the right call for room additions, garage conversions, kitchen and bath remodels, and any wall where you want more light or a larger view than the original builder gave you.

If your existing frames are sound and the opening is staying the same size, window replacement or window retrofitting is usually simpler and less disruptive. We will tell you which approach fits your home during the estimate, and why.

With 12 years in business, we are bonded and insured and an authorized Crystal Pacific Windows installer. You deal with one contact throughout, so the person who measured your wall is the person you call with a question about the install date or the trim.

What the work includes

Opening layout and framing

We mark the opening, check for wiring and plumbing in the wall, and frame it with a header sized to the span. Bedroom windows are laid out to meet egress size so the room stays legal as a sleeping space.

Weather barrier and flashing

Most homes in the area are stucco over building paper, so we lap new flashing into the existing paper from the bottom up. The sill gets a sloped pan so any water that gets behind the frame drains out instead of into the wall.

Setting the unit

Each window is shimmed plumb, level and square, then fastened per the manufacturer's instructions. We check that sashes slide and locks engage before anything is sealed.

Insulation and sealing

We fill the space between frame and framing with a gentle, minimal-expansion foam chosen so the jambs stay straight as it cures. The outside joint then gets a backer rod and a bead of exterior sealant.

Interior and exterior finish

We patch stucco around the new frame, install interior trim or a drywall return, and leave the surfaces ready for paint.

Permit and cleanup

New and enlarged openings usually need a building permit, and we pull it and meet the inspector. At the end we haul away debris and vacuum the work area.

Signs a new installation is the right move

  • A room that stays dim all day

    If a kitchen or hallway needs lights on at noon, a new or wider opening often fixes it better than any fixture.

  • An addition or conversion is planned

    Garage conversions and room additions need windows framed and flashed from scratch, and they need to pass inspection.

  • A bedroom without proper egress

    A window too small or too high to climb through is a safety issue and can affect how the room is counted. Enlarging the opening solves both.

  • Water stains below an old opening

    Staining or soft drywall under a sill often means the original flashing failed. When the framing is damaged, a full reinstall of the opening is the honest fix.

  • A remodel that moves the layout

    New cabinets, a relocated tub or a shifted wall can leave a window in the wrong place. We close the old opening and frame the new one.

How an installation runs

  1. 1

    In-home estimate

    We look at the wall from inside and out, talk through the size and style you want, and measure. You get a written estimate that lists the framing, the window, the finish work and the permit separately.

  2. 2

    Ordering and permit

    Once you approve, we order the windows to size and take care of the permit application with the building department. Your one contact calls you when both are ready and sets a date that works for you.

  3. 3

    Installation day

    We cover floors and furniture near the wall, cut and frame the opening, flash it and set the window. Most single openings are closed up and weathertight by the end of the day.

  4. 4

    Finish and inspection

    Stucco patching and interior trim follow. We schedule and attend the inspection, then walk the finished window with you so you know how it operates and what to clean it with.

What moves the price

We quote each installation from your actual wall, because framing and finish work vary more from job to job than the window does. The written estimate breaks the job into its parts, so you can see what each piece costs and adjust the plan before anything is ordered.

Size and type of opening
Cutting a new opening costs more than enlarging one, and a wider span needs a heavier header. A load-bearing wall may need temporary support while the header goes in.
Window style and glass
Sliders, casements and fixed picture windows are priced differently, and low-E or tempered glass adds to the unit cost. Tempered glass is required near doors, tubs and close to the floor.
Wall finish
Stucco patching and color matching take more time than siding or drywall alone. The interior trim style you choose matters too.
Access
Second-story openings or walls behind tight side yards may need scaffolding or extra labor.
Permits and hidden conditions
Permit fees are part of the quote. If we open the wall and find damaged framing or wiring in the way, we show you photos and price the fix before doing it.

Window installation questions

Something not covered here? (626) 587-3172

What is the difference between installation and replacement?

Replacement puts a new window into an existing opening, often without touching the wall. Installation means building or changing the opening itself, with framing, flashing and finish work. If your opening is staying the same size, our Window Replacement page covers that work.

Do I need a permit for a new window opening?

In most cases, yes. Cutting or enlarging an opening changes the wall structure, so it is reviewed and inspected. We handle the application and the inspection as part of the job.

Can you add a window to a stucco wall without obvious patching?

We cut the stucco cleanly, tie the new flashing into the existing paper and patch with a texture matched as closely as we can to the wall. Fresh stucco usually needs paint to blend fully, and we will talk through that during the estimate.

How long will part of my wall be open?

For a typical single opening, the wall is cut, framed and closed with the window in place the same day. Finish work and the inspection follow over the next visits, which your contact schedules with you.

Which windows do you install?

We are an authorized Crystal Pacific Windows installer and can show you their frame styles and glass options at the estimate. We help you choose based on the room, the sun exposure and how you want the window to open.

Single-story stucco house with new white-framed windows on both sides of a black entry door with glass sidelites, shrubs, walkway, and a tool bag and bucket nearby

Planning a new opening?

Tell us about the wall and the room, and we will come measure and explain what the work involves. Our free in-home estimates come with no sales pressure or obligation.