Skip to content

Bonded and insured, 12 years in business. Free quote

(626) 587-3172
(626) 587-3172
Installer seen from behind applying spray foam around a newly installed double-pane sliding window from inside a room with patched drywall, palm tree and rooftops outside

ServicesEnergy Efficient Windows

Energy Efficient Windows in Rowland Heights

We replace tired aluminum and single-pane windows with dual-pane, low-E units that hold back summer heat and quiet the street. One person from our company handles your questions, the order and the install schedule, so you always know who to ask.

Glass that does more of the work

Most of the heat that makes a west-facing room hard to sit in on an August afternoon comes through the glass and the frame. An energy efficient window slows it down with a low-emissivity coating that reflects infrared heat, a sealed gap between two panes filled with argon gas, and an insulated vinyl frame that does not conduct heat the way bare aluminum does.

California's Title 24 energy standards limit how much heat a replacement window can let through, measured as U-factor and solar heat gain. Every unit we quote meets them, and the NFRC label on the glass shows the ratings so you can compare options yourself.

The person who measures your home is the same person you call with questions and the one who checks the finished work with you. As an authorized Crystal Pacific Windows installer, we can show you frame samples and glass options before you choose.

What an energy efficient window project includes

Glass matched to each wall

South and west elevations get a coating with low solar heat gain. Shaded north rooms can take a coating that lets in more daylight. We walk each opening with you and note which way it faces.

Insulated vinyl frames

Multi-chambered vinyl resists heat transfer far better than original aluminum frames. We go over color and finish with samples in hand.

Warm-edge spacers and argon fill

The spacer between the panes is where heat loss and condensation start on older units. Warm-edge spacers and argon gas keep the inner pane closer to room temperature.

Air sealing at the opening

A good window loses much of its value if air leaks around it. We seal the gap between frame and wall with low-expansion foam and finish with exterior sealant suited to your stucco or trim.

Permit and code paperwork

Where a permit is required for window changes, we pull it and leave the energy labels on the glass for the inspector.

Cleanup and label walk-through

We haul away old frames and glass, vacuum the work areas, and show you how to read the rating stickers before they come off.

Signs your windows are costing you energy

  • Rooms that stay hot after sunset

    If a bedroom holds heat long after the sun drops, the glass and aluminum frame are likely radiating stored heat back inside.

  • Fogging between the panes

    Haze or moisture trapped inside a dual-pane unit means the seal has failed and the insulating gas has escaped. The window now performs close to single-pane.

  • Faded floors and furniture

    Uncoated glass passes ultraviolet light that bleaches rugs, wood floors and upholstery. Low-E coatings block most of it.

  • Air conditioning that runs all afternoon

    When the system rarely cycles off on warm days, windows are often a large share of the load.

  • Drafts and dust at the sill

    Worn weatherstripping on old sliders lets in hot air in summer, fine dust during Santa Ana winds and a chill on winter nights.

How the work goes, start to finish

  1. 1

    Free in-home estimate

    We measure every opening, note which way each one faces and recommend a glass package for each. You get a written, line-item quote with no sales pressure or obligation.

  2. 2

    Ordering your windows

    Windows are built to the measurements we take. Your contact confirms the order details with you, then calls with a delivery and install date.

  3. 3

    Installation day

    The crew lays drop cloths and covers floors and furniture near each opening. We pull out an old unit only when its replacement is ready to go in, which keeps each wall open for a short stretch rather than all day. Each new window is set level, sealed and checked for smooth operation.

  4. 4

    Final walk-through

    We go window by window with you, test locks and sashes, and take the old frames away. If anything needs attention later, you call the same person who started the job.

What affects the cost of energy efficient windows

Price depends on the windows you choose and the openings they go into. Your quote lists each window separately, so you can see exactly where the money goes before you commit. If you already have another written estimate, mention it when you call and we will compare it with ours.

Number and size of openings
Larger units and picture windows use more glass and take more care to handle. Ordering several windows at once usually lowers the cost per opening.
Glass package
Triple-pane, laminated or specialty low-E glass adds to the price. We recommend it only where heat, noise or security make it worth paying for.
Retrofit or full-frame install
A retrofit sets the new window into the existing frame and leaves stucco intact. A full-frame install removes everything down to the framing and costs more, but suits damaged openings. Our Window Retrofitting page explains the difference.
Style and finish
Sliders and single-hung windows are the most economical. Casements, custom shapes and colored frames add cost.

Energy efficient window questions

Something not covered here? (626) 587-3172

How much will new windows lower my energy bill?

It depends on how many windows you replace, which way they face and how well the rest of your home is insulated. We won't promise a number we can't back up. Replacing single-pane aluminum with dual-pane low-E glass does reduce heat gain in sun-facing rooms, and most people feel it on the first hot afternoon.

Will low-E glass make my rooms darker?

Modern low-E coatings are nearly clear. Some solar control packages carry a faint tint you may notice next to plain glass. We bring samples so you can judge them in your own light before ordering.

Do energy efficient windows help with noise?

Yes. Dual-pane glass and a tight seal around the frame cut street and freeway noise noticeably. Laminated glass helps further if a bedroom faces a busy road.

What protection do I have while the crew is at my house?

Our company carries a bond and insurance coverage, and we have been doing this work for 12 years. Your contact stays on the job from the first measurement to the final walk-through. If something about the work worries you, before the crew arrives or after they leave, that one person is who you call.

Does the whole house have to be done in one project?

No. Plenty of homeowners begin with the two or three rooms that bake in the afternoon and add the rest in a year or two. We note the frame color, style and glass package on your file, so the second round matches the first.

Single-story stucco house with new white-framed windows on both sides of a black entry door with glass sidelites, shrubs, walkway, and a tool bag and bucket nearby

Start with the rooms that run hot

Tell us how many windows you have and which rooms bother you most. We'll set up a free in-home estimate, and you'll work with the same person until the last old frame is hauled away.