
ServicesSliding Door Replacement
Sliding Door Replacement in Rowland Heights
We replace tired, hard-to-move sliding doors with new units that roll smoothly, seal tightly and keep heat out. One person handles your questions, the measuring, the order and the install day, so you always know who to ask and what happens next.
When a new sliding door makes more sense than another fix
Many older sliders around Rowland Heights have aluminum frames and single-pane glass. Over time the rollers flatten, the bottom track wears or corrodes, and the metal frame carries heat straight into the room. Fresh rollers may buy a season, but once the track is gouged or the frame has racked out of square, the door keeps fighting you.
Sliding door replacement takes out the old panels and frame and sets a new unit sized to your opening. You get dual-pane tempered glass, a frame that does not sweat or radiate heat, and hardware that latches cleanly. With 12 years in business fitting openings like yours, we give the floor, the stucco and the trim around the door the same care as the door itself.
The person who comes out to measure is the one you call while the door is on order and on install day. If something about the opening changes the plan, you hear it from that person first, in plain terms.
What the job includes
- Careful measuring
- We measure the rough opening at several points, check it for square and level, and note the threshold height. Those numbers decide whether a standard size fits or a custom unit is needed.
- Frame and glass options
- We walk you through vinyl frame colors, two- and three-panel layouts, grid styles and Low-E glass. Every panel uses tempered safety glass, as California code requires for doors.
- Removal of the old door
- The old panels, track and frame come out with the floor and nearby walls covered. We haul the old unit away.
- Setting and sealing the new unit
- The new frame is shimmed plumb, fastened and sealed at the sill so water drains out rather than in. Exterior stucco or trim gaps are closed and caulked, and interior trim is finished cleanly.
- Adjustment and walkthrough
- Before we leave, we adjust the rollers and lock, then show you how the door operates and how to keep the track clean.
Signs your sliding door is ready for replacement
It drags or jumps the track
If you have to lift or shove the panel to move it, the rollers or track are worn. Once the track is gouged, new rollers rarely last.
Fog between the panes
Haze or moisture inside dual-pane glass means the seal has failed. The glass no longer insulates the way it should.
The room near it runs hot
Single-pane glass in a metal frame lets summer heat pour in, especially on a west- or south-facing wall. You feel it standing a few feet away.
Drafts, dust or water at the sill
Worn weatherstripping and a failing sill let in air, grit and rain. Dark staining on the floor near the track is a common clue.
The lock does not catch
When the frame shifts, the latch stops lining up with the keeper. A door that will not lock reliably is worth replacing.
How the work goes, start to finish
- 1
Free in-home estimate
We look at the opening, measure, talk through options and give you a written quote. Our in-home estimates come with no sales pressure or obligation.
- 2
Ordering
Once you choose your door, we place the order and confirm the size and details with you in writing. Your contact keeps you updated until it arrives.
- 3
Install day
Most single openings take part of a day. We protect the floor, remove the old unit, set and seal the new door, then patch and caulk around it.
- 4
Cleanup and walkthrough
We vacuum, remove debris and the old door, and test the slide and lock with you before we leave.

What affects the price of a sliding door
No two openings are quite alike, so we price the door after measuring it rather than guessing. Your quote lists the door, the labor and any finish work on separate lines. You can get your free quote by phone or at the estimate, with no obligation.
- Width and number of panels
- A plain two-panel slider sits at the lower end. Each added panel, extra width or a taller custom height raises the price of the unit and the time it takes to set.
- Glass package
- Low-E coatings, gas fills and grids add to the price. They also decide how much summer heat reaches the room.
- Frame style and color
- White vinyl is the most economical choice. Darker exterior colors and specialty finishes cost more.
- Condition of the opening
- Rot or damage in the framing or subfloor beneath the old track must be fixed first. If we uncover any, you see photos and a separate price, and nothing extra happens until you agree.
- Exterior finish
- Some installs call for cutting back and patching stucco, while others fit within the existing frame. The method that suits your home changes the labor involved.
Sliding door questions we hear often
Something not covered here? (626) 587-3172
Can you replace the door without tearing out stucco?
Often, yes. If the existing frame is sound, a retrofit-style unit can sit inside it with trim covering the edges. If the frame is damaged or you want the most glass possible, we take it out completely and patch the stucco. We explain which approach fits at the estimate.
Which brands do you install?
We are an authorized Crystal Pacific Windows installer, and we will show you the sliding door options that suit your opening. We walk through differences in frame, glass and hardware so you can compare them side by side.
Will the new door be more energy efficient?
A new vinyl unit with dual-pane Low-E glass blocks far more heat than an old aluminum, single-pane door. Most people notice the room near the door stays cooler through summer. If you are also weighing your windows, our Energy Efficient Windows page covers the same glass choices.
If the door needs attention later, who do I talk to?
Your contact stays the same once the job is done. The person who measured your opening and ran your install day is the one who picks up your call. If the rollers or lock need a tweak, they arrange a visit to set it right.
Is a permit needed?
Replacing a door in the same opening usually means the new glass must meet California energy requirements. At the estimate we tell you whether your project needs a permit, and we handle the paperwork when it does.

Ready for a door that slides easily again
Tell us about your opening and we will set up a time to measure. You will speak with one person from the first call through cleanup.